PDA

View Full Version : vacuum lines?


Icemn999
12-05-2006, 02:57 AM
where do the lines on the intake manifold stay goto? not the passenger side ones but the driver side ones? do i need these or can they be blocked off?
blcknspo0ln
12-05-2006, 03:23 AM
Are you talking about your EGR lines? There's a whole bunch of vacuum lines piled up to the right of your throttle body. If that's the case, you can look at a diagram and reroute your EGR's, or you can remove them. There is a VFAQ on it.
holeshot
12-05-2006, 11:02 AM
there are 2 vac line on the intake manifold. the one that is the passanger side one is for the BOV the one that is to the driver side is for the fuel pressure reg. the large vac line on the back side is for the brake booster.
Muggus
12-05-2006, 04:43 PM
If your talking about the ones in the back that run through the metal tubes attached to teh manifold then those are part of the emissions system. They can be removed if you want.
steveVR4
12-05-2006, 05:18 PM
The ones that run through the metal tubes on the intake manifold brace are to the FPR solenoid and back to the FPR, I believe.
Muggus
12-05-2006, 05:29 PM
I think theres a seperate small nipple that comes out of the front of manifold on the inside of the coil for the FPR.
atc250r
12-05-2006, 09:53 PM
where do the lines on the intake manifold stay goto?
Mine go to the garbage can. :lol:

John
90goldtsiawd
12-05-2006, 10:03 PM
there are 2 vac line on the intake manifold. the one that is the passanger side one is for the BOV the one that is to the driver side is for the fuel pressure reg. the large vac line on the back side is for the brake booster.

Dude where'd you come from??? lol j/k never seen you post before. SICK car in your sig!