brown
01-13-2007, 12:54 AM
PARTS AVAILABILITY UPDATE 5/14 - EVERYTHING MUST GO ASAP. Any and all REASONABLE offers will be accepted.
PLEASE EMAIL OR CALL MY CELL in that I don't visit here often. gsav69@aol.com or 201 264-1422. I am available 24/7 so call anytime.
3" Stainless Extreme Exhaust 4" tip - o2 back (bad flex section) $400
Buschur Street Core $300
Buschur 2-piece lower pipe $100
3" Buschur Cold-Air Intake Pipe $150
BJ's Intake Manifold - Ford TB flange, bungs for NX jets currently blocked off $700
Accufab 75mm Throttle Body w/custom wheel, IAC motor and TPS (already rebuilt once) $200
Custom 3" Stainless Upper Pipe (to BJ's intake), flanged for Tial BOV, Meth Nozzle $200
$1000 bucks if someone buys upper IC pipe, TB and Manifold
Stock Crank (3K miles - bought new from mitsu) $450 polished
Crower Rods $500
Turbotrix Transmission $1500 - Freshened up. 4 spider center diff, new dbl sunchro 2nd & 3rd, new forks
ACT 2900 Pressure plate - 4 passes $200
ACT Street Disk - 4 passes $75
Fidanza Flywheel - 6 bolt $100
GM 3-Bar Map Sensor $50
GM Air Intake Temp Sensor with plug (brand new) $40
HKS EZ EVC $275
Konig 17" Wheels w/ 17" BFG Drag Radials (low miles) $800
Autometer 60 PSI Gauge - Dented bezel $35
Autometer 0-100 PSI Oil Pressure Gauge $35
Autometer Electric Fuel Pressure Gauge $50
AEM Uego Gauge - With sensor $200
Techedge 1.5 Uego guage set-up - no sensor $100
Derek Devises Meth Kit - Custom made for 1g. Bottle, pump, lines, nozzles $400
Bosch 044 fuel pump - -6 fitting set-up, -6 feed to rail with fittings, Aeromotive Filter w/fittings $400
Bosch 720cc Injectors $275
625cc Injectors $275 (great alternative to 550's)
Honda Battery - used 1 day $50
MSD DIS 4 - needs to be fixed by MSD - extra harness $150
GSXR Coil On Plug Coils with plug leads and/or DIS 4/AEM CDI harness $100
HKS 95 TB elbow - $25 (vpc sensor hole welded shut)
Oil Filter Housing - Forward facing, non cooler - $20
NexGen Underdrive Pulley - $40 - Anodized Turquoise
AEM Adjustable Timing Gears - Intake one OK, Exhaust one bolts backed out and blew motor. All it needs is bolts. MAKE OFFER
Chassis - Full Interior, Full Glass, Windows work, heat works, 6pt cage with swingouts, 2 harnesses (1 brand new), sway bars, 16" rims and retreads, body ok, paint ok, 4 bolt rear, SS brake lines, SS clutch line, 3 gauge bezel in center vent, drag springs w/gr2's $1200 or $2000 including Konig Rims/Drag Radials
IF ANYONE WANTS TO BUY EVERYTHING I HAVE MAKE ME A FAIR OFFER AND IT'S YOURS.
PLEASE EMAIL OR CALL MY CELL in that I don't visit here often. gsav69@aol.com or 201 264-1422. I am available 24/7 so call anytime.
3" Stainless Extreme Exhaust 4" tip - o2 back (bad flex section) $400
Buschur Street Core $300
Buschur 2-piece lower pipe $100
3" Buschur Cold-Air Intake Pipe $150
BJ's Intake Manifold - Ford TB flange, bungs for NX jets currently blocked off $700
Accufab 75mm Throttle Body w/custom wheel, IAC motor and TPS (already rebuilt once) $200
Custom 3" Stainless Upper Pipe (to BJ's intake), flanged for Tial BOV, Meth Nozzle $200
$1000 bucks if someone buys upper IC pipe, TB and Manifold
Stock Crank (3K miles - bought new from mitsu) $450 polished
Crower Rods $500
Turbotrix Transmission $1500 - Freshened up. 4 spider center diff, new dbl sunchro 2nd & 3rd, new forks
ACT 2900 Pressure plate - 4 passes $200
ACT Street Disk - 4 passes $75
Fidanza Flywheel - 6 bolt $100
GM 3-Bar Map Sensor $50
GM Air Intake Temp Sensor with plug (brand new) $40
HKS EZ EVC $275
Konig 17" Wheels w/ 17" BFG Drag Radials (low miles) $800
Autometer 60 PSI Gauge - Dented bezel $35
Autometer 0-100 PSI Oil Pressure Gauge $35
Autometer Electric Fuel Pressure Gauge $50
AEM Uego Gauge - With sensor $200
Techedge 1.5 Uego guage set-up - no sensor $100
Derek Devises Meth Kit - Custom made for 1g. Bottle, pump, lines, nozzles $400
Bosch 044 fuel pump - -6 fitting set-up, -6 feed to rail with fittings, Aeromotive Filter w/fittings $400
Bosch 720cc Injectors $275
625cc Injectors $275 (great alternative to 550's)
Honda Battery - used 1 day $50
MSD DIS 4 - needs to be fixed by MSD - extra harness $150
GSXR Coil On Plug Coils with plug leads and/or DIS 4/AEM CDI harness $100
HKS 95 TB elbow - $25 (vpc sensor hole welded shut)
Oil Filter Housing - Forward facing, non cooler - $20
NexGen Underdrive Pulley - $40 - Anodized Turquoise
AEM Adjustable Timing Gears - Intake one OK, Exhaust one bolts backed out and blew motor. All it needs is bolts. MAKE OFFER
Chassis - Full Interior, Full Glass, Windows work, heat works, 6pt cage with swingouts, 2 harnesses (1 brand new), sway bars, 16" rims and retreads, body ok, paint ok, 4 bolt rear, SS brake lines, SS clutch line, 3 gauge bezel in center vent, drag springs w/gr2's $1200 or $2000 including Konig Rims/Drag Radials
IF ANYONE WANTS TO BUY EVERYTHING I HAVE MAKE ME A FAIR OFFER AND IT'S YOURS.