91tsiguy
01-27-2007, 10:11 PM
I was digging through my bin of dsm parts at work and gathered up all the things that I had previously on the Talon or around that I no longer need so it's time to clear things out. Prices do not include shipping unless stated. All pictures are current and taken tonight (1/27/07)
Moroso battery box. Needs grommets for power cables. The one tie down rod is slightly corroded from a battery that leaked a little acid out but will still work fine. $Make an offer$
http://i65.photobucket.com/albums/h209/91TSiGuy/dsm%20parts%20for%20sale/100_1394.jpg
Hood pins. Chrome plated but showing some rust and wear from use. I didn't want to chuck them so come pick them up if you want or pay shipping.
http://i65.photobucket.com/albums/h209/91TSiGuy/dsm%20parts%20for%20sale/100_1395.jpg
Oil Catch Can. I made this for the Talon to bolt onto the passenger side frame rail, but it can be mounted anywhere with the right bracket for it. Side hole is tapped for 3/8"npt but I can weld a bung on there and tap it to 1/4"npt instead. Your choice. Just switching over to a catch can in our product line, other than that it was fine. $40
http://i65.photobucket.com/albums/h209/91TSiGuy/dsm%20parts%20for%20sale/100_1396.jpg
http://i65.photobucket.com/albums/h209/91TSiGuy/dsm%20parts%20for%20sale/100_1397.jpg
Evo Small Battery Kit. Tray only, no battery, only used a few months. $125 new, selling for $70
http://i65.photobucket.com/albums/h209/91TSiGuy/dsm%20parts%20for%20sale/100_1398.jpg
1g Knock Sensor. Used but maybe for 10k miles if that. I ended up switching to the 2g sensor when I went to the AEM. $40
http://i65.photobucket.com/albums/h209/91TSiGuy/dsm%20parts%20for%20sale/100_1399.jpg
-6AN fuel rail adapter. New, never used. I think the anodizing changed the threads slightly b/c tightening on a hose end is a little tougher than normal Aeroquip fittings, however it should work fine. $Make offer
http://i65.photobucket.com/albums/h209/91TSiGuy/dsm%20parts%20for%20sale/100_1400.jpg
Moroso universal coolant overflow can. Uses the bottom of can for inlet/outlet hose from thermostat housing. $Make any offer
http://i65.photobucket.com/albums/h209/91TSiGuy/dsm%20parts%20for%20sale/100_1401.jpg
Mr Gasket 12" fan. Setup in pusher mode currently. Looking for an 8" fan for trade or $50 straight up
http://i65.photobucket.com/albums/h209/91TSiGuy/dsm%20parts%20for%20sale/100_1402.jpg
http://i65.photobucket.com/albums/h209/91TSiGuy/dsm%20parts%20for%20sale/100_1407.jpg
Remote Oil Filter Housing kit. One end screws onto the stock Mitsu filter housing, the other can be mounted where ever you want. Uses Ford style filter (I used to use the larger V8 truck filters from early 90s) All you need is -8AN hose and hose ends to make it work. $Make offer$
http://i65.photobucket.com/albums/h209/91TSiGuy/dsm%20parts%20for%20sale/100_1403.jpg
Dejon Tool BOV adapter for 2g/Evo. Allows 1g bov to bolt in place of the crappy plastic stock bov's. $15
http://i65.photobucket.com/albums/h209/91TSiGuy/dsm%20parts%20for%20sale/100_1404.jpg
1g turbo timer harness. $Make Offer$
http://i65.photobucket.com/albums/h209/91TSiGuy/dsm%20parts%20for%20sale/100_1405.jpg
Sony Headunit. Wired and ready for 1g installation. Not sure of the model but it's about 7 years old. $Make Offer$
http://i65.photobucket.com/albums/h209/91TSiGuy/dsm%20parts%20for%20sale/100_1409.jpg
Moroso battery box. Needs grommets for power cables. The one tie down rod is slightly corroded from a battery that leaked a little acid out but will still work fine. $Make an offer$
http://i65.photobucket.com/albums/h209/91TSiGuy/dsm%20parts%20for%20sale/100_1394.jpg
Hood pins. Chrome plated but showing some rust and wear from use. I didn't want to chuck them so come pick them up if you want or pay shipping.
http://i65.photobucket.com/albums/h209/91TSiGuy/dsm%20parts%20for%20sale/100_1395.jpg
Oil Catch Can. I made this for the Talon to bolt onto the passenger side frame rail, but it can be mounted anywhere with the right bracket for it. Side hole is tapped for 3/8"npt but I can weld a bung on there and tap it to 1/4"npt instead. Your choice. Just switching over to a catch can in our product line, other than that it was fine. $40
http://i65.photobucket.com/albums/h209/91TSiGuy/dsm%20parts%20for%20sale/100_1396.jpg
http://i65.photobucket.com/albums/h209/91TSiGuy/dsm%20parts%20for%20sale/100_1397.jpg
Evo Small Battery Kit. Tray only, no battery, only used a few months. $125 new, selling for $70
http://i65.photobucket.com/albums/h209/91TSiGuy/dsm%20parts%20for%20sale/100_1398.jpg
1g Knock Sensor. Used but maybe for 10k miles if that. I ended up switching to the 2g sensor when I went to the AEM. $40
http://i65.photobucket.com/albums/h209/91TSiGuy/dsm%20parts%20for%20sale/100_1399.jpg
-6AN fuel rail adapter. New, never used. I think the anodizing changed the threads slightly b/c tightening on a hose end is a little tougher than normal Aeroquip fittings, however it should work fine. $Make offer
http://i65.photobucket.com/albums/h209/91TSiGuy/dsm%20parts%20for%20sale/100_1400.jpg
Moroso universal coolant overflow can. Uses the bottom of can for inlet/outlet hose from thermostat housing. $Make any offer
http://i65.photobucket.com/albums/h209/91TSiGuy/dsm%20parts%20for%20sale/100_1401.jpg
Mr Gasket 12" fan. Setup in pusher mode currently. Looking for an 8" fan for trade or $50 straight up
http://i65.photobucket.com/albums/h209/91TSiGuy/dsm%20parts%20for%20sale/100_1402.jpg
http://i65.photobucket.com/albums/h209/91TSiGuy/dsm%20parts%20for%20sale/100_1407.jpg
Remote Oil Filter Housing kit. One end screws onto the stock Mitsu filter housing, the other can be mounted where ever you want. Uses Ford style filter (I used to use the larger V8 truck filters from early 90s) All you need is -8AN hose and hose ends to make it work. $Make offer$
http://i65.photobucket.com/albums/h209/91TSiGuy/dsm%20parts%20for%20sale/100_1403.jpg
Dejon Tool BOV adapter for 2g/Evo. Allows 1g bov to bolt in place of the crappy plastic stock bov's. $15
http://i65.photobucket.com/albums/h209/91TSiGuy/dsm%20parts%20for%20sale/100_1404.jpg
1g turbo timer harness. $Make Offer$
http://i65.photobucket.com/albums/h209/91TSiGuy/dsm%20parts%20for%20sale/100_1405.jpg
Sony Headunit. Wired and ready for 1g installation. Not sure of the model but it's about 7 years old. $Make Offer$
http://i65.photobucket.com/albums/h209/91TSiGuy/dsm%20parts%20for%20sale/100_1409.jpg