View Full Version : INJECTORS: PTE OR FIC
tsisleeper
02-05-2007, 02:40 PM
Hey guys,
I seen two websites with injectors on sale. So I am about to purchase one of them.
I seen the PTE 1000's for $279 shipped and the FIC 1000's for $300 shipped. Is there a difference in the two. Or are both pretty much the same??
LilBeanTSI
02-05-2007, 03:13 PM
Why do you need 1000 cc injectors?
gtluke
02-05-2007, 03:21 PM
same reason i buy magnum condoms?
to impress your friends and cashier.
and then only fill half of em :P
hm better more than less.
Nate Crisman
02-05-2007, 03:28 PM
hm better more than less.
Hows your knock sensor feel when your running 55% duty cycle , -50% airflow signal, and the ecu wants to run 44* of ignition timing at wot. :lol:
tsisleeper
02-05-2007, 04:08 PM
Getting DSMlINK next month, so might as well go bigger now so I won't need to upgrade them again.
So is there any difference between the PTE & FIC??
gtluke
02-05-2007, 04:11 PM
get 88mm turbo while you are at it, i mean why upgrade twice?
...and then only fill half of em :P
hahha, half??? more like 1/8th buddy...At least you can tie it off and use it again.
i'd rethink getting 1000cc injectors until you have the hardware to support it. What kinda "package" you sportin there big guy? :wink:
Anywho...I support the FIC over the PTE. Same injectors physically but I think FIC does more quality control, balancing & matching on the ones they sell. However this is JMHO.
Getting DSMlINK next month, so might as well go bigger now so I won't need to upgrade them again.
it doesn't really work like that. you can only open a solenoid so fast before it doesn't work right/efficient. Without enough air your ECU will make the injector work soo fast that it may self destruct the solenoid inside. :twisted:
however, i have no idea what your current setup is.
gtluke
02-05-2007, 04:32 PM
stop trying to talk logic to a guy who is trying to buy 1000cc injectors
i wuz jest tryin to help :(
Big Block DSM
02-05-2007, 04:52 PM
same reason i buy magnum condoms?
to impress your friends and cashier.
and then only fill half of em :P :D
tsisleeper
02-05-2007, 05:48 PM
Okay does it matter whether I get 1000's or 550's. I was jsut clearly asking what were the difference in both companies. At least two people actually tried to help answering my original question.
Let me rephrase my question so I don't get ripped by you guys. What brand of injectors do you guys prefer, PTE or FIC??
Nate Crisman
02-05-2007, 05:52 PM
Okay does it matter whether I get 1000's or 550's. I was jsut clearly asking what were the difference in both companies. At least two people actually tried to help answering my original question.
Let me rephrase my question so I don't get ripped by you guys. What brand of injectors do you guys prefer, PTE or FIC??
The brand is somewhat inconsiquential. They are the same injectors physicly, both PTE and FIC are bosch injectors. The differenace is in the balancing and testing. My opinion is with Hinz in that FIC spends more time/effort into making sure they are correct.
gtluke
02-05-2007, 05:54 PM
i dont think it means a shit worth of difference. on a stock turbo car those things are just going to be dripping like hinz dick
atc250r
02-05-2007, 06:10 PM
I'll sell 850's to everyone!! Wastegates is like Y000000!!!
:lol: Where's that link to the old site when I need it?
Listen to Nate. He was a PTE distributor yet he's recommending FIC's for a reason. :wink:
John
DSMmaniac_Big_O
02-05-2007, 06:13 PM
44* of timing.... http://smilies.sofrayt.com/%5E/c0/rofl.gif
Have fun trying to get it to idle....
tsisleeper
02-05-2007, 07:02 PM
Thnaks guys for the opinions.
Big Block DSM
02-05-2007, 07:42 PM
Okay does it matter whether I get 1000's or 550's. I was jsut clearly asking what were the difference in both companies. At least two people actually tried to help answering my original question.
Let me rephrase my question so I don't get ripped by you guys. What brand of injectors do you guys prefer, PTE or FIC??
The brand is somewhat inconsiquential. They are the same injectors physicly, both PTE and FIC are bosch injectors. The differenace is in the balancing and testing. My opinion is with Hinz in that FIC spends more time/effort into making sure they are correct. i feel the same way fic spends more time and effort making sure everthing is on the ball
i dont think it means a shit worth of difference. on a stock turbo car those things are just going to be dripping like hinz dick
one of these days i'm going to see a dr. about that.
MikeL
02-05-2007, 10:20 PM
Moved to tech, I've used FIC's for a few years, no complaints.
1gnasty
02-06-2007, 09:10 PM
i had pte for a year now with no complains so far and the reason i got 1000 is because they are cheeper than the 650 or 780's 8)
Powered by vBulletin™ Version 4.1.3 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.