PDA

View Full Version : Need some advice



silverboost
03-26-2007, 01:58 AM
I have 1g, yesterday instaled sheetmetal intake, drove to get some gas , loaded up dsmlink with some settings, car starts sputering, doesnt want to stay on,give it throtle barely responnds to the gas, sputers, i check under the hood,my injectors leaking, fixed that, problem doesnt go away, load up dsm link , throws a code "throtle position malfunction" ...
Now I had 880s in the car with no fuel control for cpuple weeks, runing extremly rich, i cleaned the plugs really well, didnt have another set layin around, but still the problem doesnt go away, i never had a bad TPS, not sure how the car acts, this is a 91awd, any advice guys ?

1gnasty
03-26-2007, 05:46 PM
load up dsm link , throws a code "throtle position malfunction" ...
bad TPS
there is your problem

silverboost
03-26-2007, 09:43 PM
load up dsm link , throws a code "throtle position malfunction" ...
bad TPS
there is your problem


tried 2 tps sensors same, nothing... im thinkin my transistor pack is shot since i never had it grounded after i instaled the sheet metal intake, i need to try a diff one, usualy when the tps is bad the car doesnt act so retarded/undrivable