Wtb Transfer case bolts

[97gsxminus1bolt]

Well pulled out my transfer case because of the recall leak problem. And my transfer case was being held on by the three long bolts but not the 2 shorts bolts. Thanks Jxxn Nxxri I need these two short bolts. Any one have any lying around willing to ship?

[gtluke]

hahaha lol

[Bean]

Well pulled out my transfer case because of the recall leak problem. And my transfer case was being held on by the three long bolts but not the 2 shorts bolts. Thanks Jxxn Nxxri I need these two short bolts. Any one have any lying around willing to ship?

Worse case you can use a nut and bolt for the bottom short one until you get the right bolt. Two of the threads on my bellhousing were stripped last season and since I didn't feel like pulling the trans and using a heli-coil i just used a nut and bolt for the bottom. The top one I left out. :lol:
If only 4 of the 5 bolts are there you will be fine.

[97gsxminus1bolt]

Thanks for the tip jnztuning had one in stock so I can nut and bolt the other one.

[gtluke]

when my transfer case locked up on my talon, it broke the ear off the trans where that bolt goes. it was violent.
anyway it was fine with 4 bolts :)
but yeah, missing 2 in a row on the bottom like that is not so good. it will eventually snap the ears off the trans at the top from "hinging"