PDA

View Full Version : JMF is Moving!


91tsiguy
05-19-2008, 10:20 PM
With the company growing and future plans to expand our manufacturing capabilities our current shop just didn’t meet the space requirements. As many of you know we currently share the shop with another big name performance shop and we basically split the space right down the middle. Although our current shop is 5,000 SQFT, JMF only occupies about 2,000 SQFT of that space. About a month ago we signed the lease on a brand new 6500 SQFT unit that only JMF will occupy! An exact move-in date has not been set yet because the building is still under construction but it will most likely be anywhere from June 15th-July 1st……we will keep everyone updated as the move may delay production by a few days. Here are a couple pictures, more pictures are available in the link below:


http://www.jmfabrications.com/pictures/NEWSHOP/DSC01723_sm.jpg
http://www.jmfabrications.com/pictures/NEWSHOP/DSC01719_sm.jpg
http://www.jmfabrications.com/pictures/NEWSHOP/DSC01709_sm.jpg
http://www.jmfabrications.com/pictures/NEWSHOP/DSC01717_sm.jpg


Other biggie non-resized pics:
http://www.jmfabrications.com/pictures/NEWSHOP/
TheGreenMonster
05-19-2008, 11:02 PM
NJ? :wink:
gtluke
05-19-2008, 11:42 PM
SIQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQ
Greg97GSX
05-19-2008, 11:45 PM
NJ? :wink:
gtluke
05-19-2008, 11:50 PM
yeah right. they are still out in bumblefuck
Nate Crisman
05-20-2008, 12:26 AM
Heh, that building in NJ would rent for $10,000 a month. HAHA that's alota catch cans
joeybags7112
05-20-2008, 12:42 AM
Heh, that building in NJ would rent for $10,000 a month. HAHA that's alota catch cans

Its ok , catch cans now cost $325 , LOL. manifolds are $995 , LOL.
Hinz
05-20-2008, 09:59 AM
moving sucks ass, nice building thou.
when's the party?
Utah Joe
05-20-2008, 10:47 AM
nice brent,

if you guys need any help laying out the new shop, setting/moving up the cnc/manufacturing equipment let me know.
91tsiguy
05-20-2008, 01:45 PM
Sorry guys, we're still sticking to PA. I Think my boss enjoys his 5 minute drive to work too much to go any farther. :lol:

I think we'll be pretty well set with helping hands moving, as we all have some sort of truck or trailer vehicle to move the most amount in the shortest time. Our CNC will be the only thing we need to hire a local company to move since it's around 10k lbs

Look for an open house event posting in the future once we get all set up. It should be early to mid July. Right now the contractors are ahead of schedule by about 2 weeks so we think we'll get in there the middle of June.

The new location is 3 right hand turns off of the Landsdale NE turnpike extension so it's really easy to find. No more torn up driveway, no more creepy bathroom building--let alone our current building with leaky roof and all, and no more other people clutter. I can't wait! :)