WTB: oil feed line

[iboostdoyou]

in a complete lapse of the mind I thought my braided SS line from my 20g kit would fit my e316g but it doesnt. I plan on doing the turbo swap tomorrow morning (saturday), and I need one BAD. Anything that will fit into the evo3 center section, cash in hand!!! I dont think any shops are open tomorrow so i'm kinda in a pickle, hopefully someone's got something... 973-722-1489

[awdrst]

if the stock one will work i'm pretty sure i have one laying around. You can have it with the banjo bolt and copper washers. I'll check in an hour or so. J
Just realized you've got a 2g not sure if it matters but i've got the stock one off of a 1g.

[atc250r]

Unless they changed their schedule DS is open for a few hours tomorrow. The 20G feed is different than the 16?

John

[iboostdoyou]

awdrst - great to know you have one, yea I think the 1g taps off of the head while the 2g taps off of the oil filter housing. Not positive but I think thats how it works. If i cannot get ahold of any local shops tommorrow morning I will come pick it up. Pm me with location/price/time, thanks!

atc250r - I figured the feed would work since its basically the same design, but the 20g was a hahn turbo so i'm thinking the HRC oil feed line is different than the standard kit :?: ... on the bright side, I now have a ss feed line for sale 8)

edit: I just pm'ed nate, hopefully he checks his pm's in the morning (not likely). I guess i'm just gonna have to hope they open up tomorrow early

[BigT]

Kyle, like i told you over the phone, your line will work. You just need a small adapter fitting which bolts into the chra and then onto your feed line. At least thats the way mine is setup. If DS is open, you can probably get that bolt for a couple bucks. On the other hand, a stock 1g feed line will work perfectly fine.

[iboostdoyou]

Kyle, like i told you over the phone, your line will work. You just need a small adapter fitting which bolts into the chra and then onto your feed line. At least thats the way mine is setup. If DS is open, you can probably get that bolt for a couple bucks. On the other hand, a stock 1g feed line will work perfectly fine.

exactly... I dont know if DS is gonna be open or not :cry: . If they are then I will try and get the fitting, if not i'll pick up the whole line. I was just trying to see if for some miracle someone had a full ss line sitting around that I could pick up.

edit: took a ride to Broadway, John didnt have exactly what i needed, but was extremely helpful. Thanks again! Anyway, I still dont have what I need, but I might just wait it out and pick up a full SS line kit new