Performance Parts for sale

[Bean]

I have some more parts for sale off a 1G that I just bought.

-Fluidyne rad with two high flow fans. Rad is in mint condition. $300
-Full Fuel system: SX fuel pump, -10 feed line that "Y"'s into two -8's to feed both sides of the fuel rail. Modified rail, aeromotive FPR, -6 return line $400
-Extrude hone and polished 1G intake manifold $150
-Frank 5 Turbo fully ported with heavily ported 95 manifold. Turbo is set up for wastegate off the 02 housing. Comes with oil feed line. $400
-Buschur 3.5" stainless TBE. $600
-1991 Race trans $1100
-ND 720cc inj $200
-Buschur Street Core FMIC kit with Greddy Type R BOV kit is complete with polished pipes, silicone, TB elbow, and Oveflow $600
-Indy Race core FMIC with polished pipes, and Tial BOV $1000

[hindle]

I'm going to steer a certain person clear from viewing this post. He might jump off of a bridge. hahaha

[Bean]

Yes he would. He didn't want to know how much I sold the car for. HAHA!!

[91tsiguy]

Might have a customer interested in the fuel system. Any pics I can pass along? What model aeromotive pump is it?

[Bean]

I will take some pics tomorrow.

[Bean]

Some more stuff

-Unorthodox Underdrive pulley $75
-Unorthodox Red Cam gears $150
-Turbotrix Underdrive pulley $50
-Mocal Oil cooler with -10 lines and oil filter housing $150
-Complete fuel system with two Bosch -044 pumps, twin -8
feeds from tank to pump, twin -6 feeds to "y" fitting, -8 to MSD rail,
Aeromotive FPR, 1000cc injectors, sumped stock tank, inlet and outlet
filters $1200

[gota0have0boost]

I can tell who ever how much you sold the car for. :)

[Bean]

HAHAH!!! Yes you can. :)

[Bean]

Pics of the fuel system:

http://i290.photobucket.com/albums/ll247/Bean4g63/DSCF3167.jpg

http://i290.photobucket.com/albums/ll247/Bean4g63/DSCF3166.jpg




Corbeau Racing Seats with brackets: $300

http://i290.photobucket.com/albums/ll247/Bean4g63/DSCF3163.jpg

http://i290.photobucket.com/albums/ll247/Bean4g63/DSCF3162.jpg

[Nate Crisman]

kicking myself for being slow

[Bean]

kicking myself for being slow

haha!!

[gota0have0boost]

Did you want the car?

[91tsiguy]

Most likely to part out he meant.

[Bean]

Did you want the car?

Nate was going to buy the entire car to part out a while back.

[Nate Crisman]

pics of the extrude honed 1g intake manifold? Might be a nice addition to #139.

[Bean]

pics of the extrude honed 1g intake manifold? Might be a nice addition to #139.

No problem. I'll take some on monday. Its pretty nice as it was shaved down and polished.

[Bean]

Forgot to add the Buschur FMIC also comes with a 3" cold air intake w/filter for $600

[Big Block DSM]

No problem. I'll take some on monday. Its pretty nice as it was shaved down and polished.
nATE YOU NEED TP PICK THIS UP. IT LOOKS REALLY NICE

[Bean]

http://i290.photobucket.com/albums/ll247/Bean4g63/DSCF3168.jpg

http://i290.photobucket.com/albums/ll247/Bean4g63/DSCF3169.jpg


There has been a lot of interest for this manifold. It obviously does not come with the ignitor, coil, or TB. First come first serve for the intake. :)

[Bean]

Also for sale:

1993 TB with sensors $50
1993 coil pack $60
1993 Ignitor $40

Coil pack and ignitor are fairly new.

[Bean]

Prices reduced on these parts for this week only.

-Fluidyne rad with two high flow fans. Rad is in mint condition. $250
-Full Fuel system: SX fuel pump, -10 feed line that "Y"'s into two -8's to feed both sides of the fuel rail. Modified rail, aeromotive FPR, -6 return line $350
-Extrude hone and polished 1G intake manifold $150
-Frank 5 Turbo fully ported with heavily ported 95 manifold. Turbo is set up for wastegate off the 02 housing. Comes with oil feed line. $350
-Buschur 3.5" stainless TBE. $550
-1991 Race trans $1000
-ND 720cc inj $150
-Buschur Street Core FMIC kit with Greddy Type R BOV kit is complete with polished pipes, silicone, TB elbow, Oveflow, and 3" cold air intake with filter $500
-Indy Race core FMIC with polished pipes, and Tial BOV $900
-Unorthodox Underdrive pulley $50
-Unorthodox Red Cam gears $150
-Turbotrix Underdrive pulley $40
-Mocal Oil cooler with -10 lines and oil filter housing $150
-Complete fuel system with two Bosch -044 pumps, twin -8
feeds from tank to pump, twin -6 feeds to "y" fitting, -8 to MSD rail,
Aeromotive FPR, 1000cc injectors, sumped stock tank, inlet and outlet
filters $1000
-1991+TB with sensors $50
-1991+ coil pack $50
-1991+ Ignitor $30

[atc250r]

-Indy Race core FMIC with polished pipes, and Tial BOV $9000



:hsnuts:

[Bean]

:hsnuts:

They don't make it anymore....its a classic. :)

[Bean]

-Fluidyne rad - Sold
-1991 Race trans - Sold
-Indy Race core FMIC - Sold
-Mocal Oil cooler - Sold
-Complete fuel system with two Bosch -044 pumps - Sold

[Bean]

Buschur FMIC kit - Sold

[Bean]

I will be away from May 30th till June 6th. If anyone needs any parts then e-mail me after June 6th.

[Bean]

Here is what I have left:

-Full Fuel system: SX fuel pump, -10 feed line that "Y"'s into two -8's to feed both sides of the fuel rail. Modified rail, Aeromotive FPR, -6 return line $300
-Frank 5 Turbo fully ported with heavily ported 95 manifold. Turbo is set up for wastegate off the 02 housing. Comes with oil feed line. $300
-Buschur 3.5" stainless TBE. $500
-6 bolt shortblock with t-belt, water pump, water pipe, etc. Only thing missing is crank pulley and oil filter housing. $400
-Victory 2.5" stainless o2 housing with Tial 40mm wastegate and dumptube. $275
-Aluminum Crank pulley $30
-93 coil and ignitor. (Brackets are still gold color so they are pretty new) $75
-MSD DIS 2 $250
-AEM Injector driver box $200
-MSD coils with custom Magnacore wires $150

[supa_89]

Pics of this please

-Frank 5 Turbo fully ported with heavily ported 95 manifold. Turbo is set up for wastegate off the 02 housing. Comes with oil feed line. $300

[Bean]

Pics of this please

-Frank 5 Turbo fully ported with heavily ported 95 manifold. Turbo is set up for wastegate off the 02 housing. Comes with oil feed line. $300

Sorry the turbo setup and wastegate setup sold about 5 mins after I posted it. :)

[Bean]

Turbo and wastegate setup are sold

[Bean]

Ez-evc $150

[Bean]

Here is whats left now.

-Complete stock 6 bolt bottom end. $400
-Complete Race head, ported, stainless valves, double valve springs, o-rings, etc $1100
-Unorthodox Underdrive pulley $50
-Aluminum Underdive pulley $40
-HKS EZ EVC $150
-Haltec E6S with complete 1G harness $400
-1992 Race trans with 4 spider diff. $1100
-1G Buschur 3.5" stainless TBE $500
-MSD DIS2 $250
-MSD Coils with custom Magnecore wires (worked @60psi of boost)$200

[Nate Crisman]

Bean, What's the o2 housing flange look like on that downpipe? standard 2.5" 2 bolt flange that would bolt up to a "normal" dsm o2 housing?

Does it have flanges anywhere in the middle or is it all the slip fit with the wrapping band clamps?

Any pics?