PDA

View Full Version : For Sale = Everything


twizzle
10-02-2005, 09:45 PM
parting out my car entirely, anything you want, let me know.

the "mods" i can think of right now are:

pte gt3251e - 750 obo with ss feed and ss drain for 1g, 650 for 'bo alone. internal gate, "bolt on"

2g mani tapped for egt- 50 obo
Hella H4 Headlights (removable bulbs) - 60$
safc1 - -SOLD
joe p electronic manual boost controller - 60 obo
4bolt rear - 350 with back axles (Raxles.com) obo
5zigen fn01r-c 17"x7" paint gloss black, no curbing. new falken ziex tires. - 700 obo (PENDING)
2g calipers with green stuff pads - 150 obo
ss brake lines front and rear - 25 obo
custom 3" turbo back exhaust, real apexi n1 muffler - 400 obo
2g o2 - 20 obo
Indy race core FMIC kit (will get specs, similar to DS "race" core) - 450, with polished aluminum + gm maft and all couplers - 700 obo
dejon tool 1g jpipe - 30 obo PENDING
FP 4" intake with green 9" filter (non recirculated) - SOLD
fluidyne aluminum radiator - 250
ground controls on koni yellows in rear, and agx's in front - 350 obo
2g maf - SOLD
afpr - SOLD
aim: pooprophet
email: jfett@optonline.net
Adriano
10-02-2005, 10:44 PM
How much for the cas? Let me know

Adriano
Muggus
10-02-2005, 10:45 PM
I still want the intake. Ill pick it up for $70, let me know.
twizzle
10-02-2005, 11:21 PM
yeh muggus, deal if you pick it up. pm me and ill get back to you with my addy and shit or hell just im me.

i dont know if i wanna take off cas cause thats dirt cheap and would pretty much make a complete motor incomplete. still contemplating what i should do with the motor. anyone want it? its a stock rebuild with 155psi across all four, BJ's ported head, port matched exhaust to ported 2g mani, mitsu 4layer hg arp studs so its built to hold some good boost. although ill take if off if i get a good offer on the head or shortblock. but since its basically stock minus the ported head, i woudl rather sell it whole. someone make an offer.
talondsm18g
10-03-2005, 10:16 AM
What was done to the short block and who built it?
twizzle
10-03-2005, 11:33 AM
look up.... :roll:
CHRIS
10-03-2005, 11:53 AM
maybe all the details of the cleaning and machine work
97gsxminus1bolt
10-03-2005, 11:55 AM
rim pics to djoutrage17@aol.com please
talondsm18g
10-03-2005, 01:03 PM
maybe all the details of the cleaning and machine work
Yes thats what i mean.
New rods pistons?
Whos rings?
Whos bearings?
Where built?
Honed? Torque plate etc.
Thanks.
Need a reliable motor for my car so i can join you in a part out myself.
twizzle
10-03-2005, 03:40 PM
maybe all the details of the cleaning and machine work
Yes thats what i mean.
New rods pistons?
Whos rings?
Whos bearings?
Where built?
Honed? Torque plate etc.
Thanks.
Need a reliable motor for my car so i can join you in a part out myself.

to be honest, bought it like this. dont know shit about it, just know it holds 20psi on my gt3251e, held 21psi on my b16g's, still has 155psi across. was told it was a rebuild, which it most likely is, being that the cluster reads 170k+ miles, and no way in hell it would maintain near perfect compression with that old of a motor. all i know for sure is hg,studs, and the ported head, as ive seen both intake and exhaust ports. i also may have receipts, i got a shitload when i got the car but i never went through them.
talondsm18g
10-03-2005, 08:46 PM
hat are you looking to get for it then?
twizzle
10-03-2005, 10:36 PM
make a reasonable offer. i also wont have it out for a month or two cause i have no time to work on car and everything else is coming off first..
97gsxminus1bolt
10-03-2005, 10:45 PM
Rim Pics please
twizzle
10-04-2005, 11:23 AM
not home, cant get pics...just picture fn01r-c's painted gloss black. ill have them on the weekend

also have a blown big16g, had 10k miles on it. rebuildable with a perfect wheel. - 150 obo


come on guys im letting all this shit go cheap, im not asking for thousands for a stock motor or like anything near msrp for ANYTHING. yet the people who sell their shit for that much end up getting it cause it was on their "fast" car, well my car went 4seconds in the quarter mile, so now buy my shit and give me 500$ extra for each part you buy!
twizzle
10-08-2005, 04:58 AM
pics of a wheel:

http://x10.putfile.com/10/28002580113.jpg
twizzle
10-08-2005, 05:00 AM
pics of the wheels:

http://x10.putfile.com/10/28002580113.jpg
http://x10.putfile.com/10/28003001790.jpg
twizzle
10-09-2005, 10:06 PM
bump
twizzle
10-15-2005, 04:44 AM
bump one last time. damn i wish dsmtraders was still up.
destroyDSM
02-25-2006, 05:41 PM
im veryyy intersted in the rear

pm me
thanks
twizzle
02-26-2006, 12:34 PM
I posted this in october. made a new thread recently, and came to the conclusion im not parting the car futher.
JDMtalon
03-18-2006, 02:41 AM
too bad.
95RedRS
03-18-2006, 02:42 PM
I'll take the Brake lines.

How much woudl shipping be to 08003.
twizzle
03-18-2006, 02:49 PM
READ. JFC. NOTHING IS FOR SALE. someone delete this thread please.
95RedRS
03-18-2006, 09:10 PM
My bad.

Didn't read the above post.

Calm yourself ;)
bigryn3
03-20-2006, 06:15 PM
how much do you want for the rims if i pick them up
twizzle
03-20-2006, 06:22 PM
can you fucking read? 3rd time ive said it. This car is not being parted out.